This guide provides step-by-step instructions on how to set up HTTPS for your CYVIO devices to ensure a secure connection.

Step 1: Access the Web Client Open your web browser and enter the device's IP address or DDNS + Port Number into the address bar to access the device's web interface.

Step 2: Log In and Navigate Enter your device's username and password to log in. Then, follow the sequence shown in the images below to navigate to the HTTPS settings page.

Step 3: Enable HTTPS and Select Certificate Type Toggle the HTTPS switch to "Enable." You can choose between a Default Certificate or a Custom Certificate:

• Option 1: Default Certificate Select "Default" under Certificate Type and click the Save button.

• Option 2: Custom Certificate Select "Custom" under Certificate Type. Import your third-party certificate and Key file, click Install, and then click Save.

Important Note

Once HTTPS is enabled, you will need to use https:// (instead of http://) when accessing the device via your browser. If you use a custom port, ensure it is correctly specified in the URL (e.g., https://192.168.1.100:443).