CYVIO cameras support two methods for setting up Privacy Mask.
You can choose the appropriate method based on your usage scenario.

1. Set Privacy Mask via CYVIO App

Step 1

Log in to the CYVIO App.
Tap the “…” icon in the upper-right corner of the target device to open the settings menu, then select Camera Settings to enter the camera configuration page.
(Refer to the image below.)

Step 2

On the camera settings page, tap Common Settings to enter the general parameter configuration interface.
(Refer to the image below.)

Step 3

Select Privacy Mask on the common settings page.
On the privacy setup guide page, tap Next to enter the area drawing interface.
(Refer to the image below.)

Step 4

Enable the Privacy Mask toggle.

l Tap the “+” button at the bottom to create a privacy zone

l Drag to adjust the position and size of the masked area

l Tap Save to apply the settings

(Refer to the image below.)

2. Set Privacy Mask via CYVIO VMS Platform

Step 1

Visit the CYVIO VMS Management Platform:
https://vms.cyviolife.com/

After logging in, select Device from the left navigation bar to enter the device list.
Click Remote Settings next to the target device.
(Refer to the image below.)

Step 2

In the remote configuration interface, locate Privacy Mask.

• Enable the Privacy Mask feature
• Use the mouse to draw the area to be masked directly on the preview screen
• For 4-inch PTZ dome camera models, click Add first before drawing the privacy area
• Click Save to apply the settings

(Refer to the image below.)